1" true condenser capsule for studio clarity.MTP 740 CM
- 1" true condenser capsule
- Studio technology on stage
- Low-cut and pre-attenuation
- Cardioid polar pattern
Included: Microphone clip, Windscreen, Transport bag , Protective case
Your mic with a 1" true condenser capsule for studio clarity.
Our MTP 740 CM employs a 1″ studio capsule for a natural and well-balanced sound. Its ultra-thin, gold-layered 1″ diaphragm delivers first-class studio sound. Unique suspension technology provides a high degree of shock resistance and effectively minimizes structure-borne noise.
Let the audience hear your voice in full magnitude.
1" true condenser capsule
True studio technology in a handheld body.
Our MTP 740 CM puts studio performance in your hands: the large diaphragm capsule captures your voice with a high level of detail, clearly and authentically. It uses the same technology as our pristine studio microphones.
Studio technology on stage
Be at home in the studio and on stage with a single mic.
Using the same technology as our studio microphones, the MTP 740 CM boasts a huge dynamic range of 138 dB (A). With only 14 dB (A) of self-noise, you can use the MTP 740 CM not only on stage but also in the studio.
Low-cut and pre-attenuation
Clarity is everything.
Remove the mesh, and you'll find switches to activate a pre-attenuation pad of -10 dB for loud sources, as well as a low-cut at 80 Hz to reduce structure-borne noise.
Cardioid polar pattern
Say farewell to feedback.
A cardioid polar pattern picks up sound coming mainly from the front of the microphone. Unwanted reflections and background noise are effectively suppressed.
Quotes
The MTP 740 CM allows me to get the most out of a singer because the singer is so comfortable just grabbing it.
Julian Bunetta has written and produced songs for popular artists such as Leona Lewis, Chris Brown, Fith Harmony, One Direction and many more.
Sound samples
Specifications
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer
- Transducer Ø
25.4 mm, 1 in
- Polar pattern
Cardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
7 mV/Pa, -43 dBV/Pa
- Equivalent noise level
17 dB (A)
- Max. SPL for 0.5 % THD
140 dBSPL, 0 dB pre-attenuation
- Signal / noise ratio
77 dB (A)
- Dynamic range
123 dB (A)
- Pre-attenuation pad
0 dB
-10 dB
- Low-cut filter
linear
80 Hz (6 dB/oct)
- Internal impedance
150 Ω
- Rated load impedance
1,000 Ω
- Supply voltage
48 V ± 4 V
- Current consumption
5.5 mA
- Connector
Gold plated 3-pin XLR
- Microphone dimensions
51 dia. x 183 mm , 2 dia. x 7.2 in
- Microphone net weight
332 g, 11.71 oz
Microphones measured according to: IEC 60268-4 | Phantom power according to: IEC 61938 | Noise measurement according to: IEC 60268-1
