Comparar
Flexibilidad total con 8 patrones polares
Incluido: Shock mount, Magnetic pop filter, Foam windscreen, Transport bag
Cápsula de condensador de 1"
Multipatrón
Especificaciones
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer
- Diaphragm
3 micron gold sputtered Mylar
- Transducer Ø
25.4 mm, 1 in
- Polar pattern
Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
17.2 mV/Pa, -35.3 dBV/Pa
- Self-noise
7 dB (A)
- Max. SPL for 0.5 % THD
144 dBSPL
- Signal / noise ratio
87 dB (A)
- Dynamic range
137 dB (A)
- Supply voltage
48 V ± 4 V
- Current consumption
4 mA
- Internal impedance
54 Ω
- Connector
Gold plated 3-pin XLR
- Microphone enclosure
Zinc die cast
- Microphone dimensions
138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in
- Microphone net weight
325 g, 11.5 oz
Micrófonos medidos según: IEC 60268-4 | Alimentación phantom según: IEC 61938 | Medición de ruido según: IEC 60268-1
Captura cada detalle.
Incluido: Shock mount, Magnetic pop filter, Foam windscreen, Transport bag, Transport case
Cápsula de condensador de 1"
Ultra bajo nivel de ruido propio
Especificaciones
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer, externally polarized
- Transducer Ø
25.4 mm, 1 in
- Diaphragm
3 micron gold sputtered Mylar
- Polar pattern
Cardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
41 mV/Pa, -28 dBV/Pa
- Self-noise
4 dB (A)
- Max. SPL for 0.5 % THD
136 dBSPL, 0 dB attenuation
- Signal / noise ratio
90 dB (A)
- Dynamic range
132 dB (A)
- Attenuation
0 dB
-6 dB
-12 dB
- Low-cut filter
linear
80 Hz (6 dB/oct)
160 Hz (6 dB/oct)
- Internal impedance
68 Ω
- Supply voltage
48 V ± 4 V
- Current consumption
3.6 mA
- Microphone enclosure
Zinc die cast
- Connector
Gold-plated 3-pin XLR
- Microphone dimensions
158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
- Microphone net weight
371 g, 13.1 oz
Micrófonos medidos según: IEC 60268-4 | Alimentación phantom según: IEC 61938 | Medición de ruido según: IEC 60268-1