MTP 740 CM

MTP 740 CM

Studio technology onstage

Handheld performance microphone with a 1" studio condenser capsule. 

1" STUDIO CAPSULE ONSTAGE

The best of both worlds

The MTP 740 CM employs a large-diaphragm studio capsule to provide natural and authentic sound. Its ultra-thin, gold-layered 1" diaphragm delivers first-class transient response. Unique suspension technology provides high degree of shock-resistance and effectively eliminates structure-borne noise.  

MTP 740 product shot

True 1" condenser capsule

Using the same technology as our top of the line studio microphones the MTP 740 CM boasts a huge dynamic range. Its high sensitivity and exceptionally low self-noise come thanks to our patented Direct Coupling circuit design. 

  • 1" true condenser capsule
  • 4-micron Mylar diaphragm 
  • Cardioid polar pattern
MTP 740 capsule
MTP 740 capsule

Feedback-proof

Like all mics from MTP series the MTP 740 CM has an amazingly consistent polar pattern across its entire frequency spectrum. Everything below the LEWITT ring can be gripped by the artist's hand without causing the FOH engineer to lift even a single finger. The outstanding rear rejection of -25 dB guarantees super-high gain before feedback.

MTP handling

Let there be light - illuminated interface

All settings from low-cut to pre-attenuation are easily readable in dark environments thanks to the illuminated user interface. This feature comes in handy especially for line checks, helping you avoid unnecessary fumbling in the dark.  

MTP 740 capsule
MTP 740 capsule

Maximum ruggedness for rough daily touring routines

The structure-in-structure architecture provides the basis for the MTP series' ruggedness. The outside enclosure of wire-mesh cup and ring is made of sturdy spring steel while the body consists of durable zinc die cast parts. The inner enclosure is made of resilient but lightweight nylon reinforced ABS. This design ensures the best possible protection for rough daily touring routines.

Low-cut and attenuation

Adapt to every situation

Low-cut: linear, 80 Hz
Attenuation: 0 dB, -10 dB

Low cut graph for the MTP 740
Low cut graph for the MTP 740

Low-cut: linear, 80 Hz
Attenuation: 0 dB, -10 dB

Lowest handling noise

Our internal dual shock mount system achieves the most effective handling noise elimination. Refined rubber suspensions provide the best possible dampening of unwanted structure-borne noise caused by hand-movement. 

MTP 740 lowest handling noise

Sound samples

"LEWITT is the musicians new era microphone sound!"

Rick Camp

Rick Camp is a professional FoH and Audio Engineer, having worked with top performers such as Earth, Wind & Fire, Madonna, Erykah Badu, Beyoncé, Jennifer Lopez...

Rick Camp on his Console

"The MTP 740 CM allows me to get the most out of a singer because the singer is so comfortable just grabbing it."

Julian Bunetta

Julian Bunetta has written and produced songs for popular artists such as Leona Lewis, Chris Brown, Fith Harmony, One Direction and many more.

 

Julian Bunetta Lewitt endorser
MTP 740 box content

MTP 740 CM

Studio technology on stage

The MTP 740 CM uses a true 1" condenser capsule - the same technology used in our studio microphones. This results in natural, authentic sound with first-class transient response. The MTP 740 CM is built for vocal performance both onstage and in the studio. As a straightforward vocal performance microphone it features a cardioid polar pattern that ensures effective rear sound rejection in both live and studio.Thanks to our advanced suspension technology, in which the capsule and electronics are fully rubber-cushioned, the MTP 740 CM is shock-resistant and offers highly effective structure-borne noise elimination. With its two step pre-attenuation and switchable low-cut setting it can be adjusted to a variety of vocal requirements and recording situations. In short: the MTP 740 CM has everything onboard for the most demanding live and studio vocal performances and recordings. Pure large-diaphragm studio condenser sound and features onstage - onstage feeling in the studio !

Specifications

Acoustical operating principle

Pressure gradient transducer, externally polarized

Transducer Ø

25.4 mm, 1 in

Polar pattern

Cardioid

Frequency range

20 ... 20,000 Hz

Sensitivity

9 mV / Pa (-41 dBV)

Signal / noise ratio

79 dB (A)

Equivalent noise level

14 dB (A)

Dynamic range

138 dB (A)

Max. SPL for 0.5 % THD

152 dBSPL, 0 dB pre-attenuation

Pre-attenuation pad

 0 dB
-10 dB

Low-cut filter

linear 
80 Hz (6 dB/oct)

Internal impedance

150 Ω

Rated load impedance

1,000 Ω

Supply voltage

48 V +/- 4 V

Current consumption

5.5 mA 

Connector

Gold plated 3-pin XLR

Microphone dimensions

51 dia. x 183 mm , 2 dia. x 7.2 in

Microphone net weight

332 g / 11.71 oz

Show more Show less


Microphones measured according to: IEC 60268-4
Phantom power according to: IEC 61938
Noise measurement: IEC 60268-1