USB microphoneDGT 450
- Compatible with iOS // OS X // Windows
- Direct monitoring
- Low-latency audio interface
- Headphone connector
Included: Microphone mount, DGT USB cable, DGT lightning cable, Tripod
Professional USB Microphone
Perfect for podcasts, gaming and home studio recording.
Whenever you need high-resolution audio, the DGT 450 is the ideal solution for professional USB recording. Featuring the same capsule used in our highly acclaimed studio line, the DGT 450 guarantees distortion-free and crystal-clear sound. A built-in headphone amp, direct monitoring functionality, low-cut filter, and pre-attenuation round off this comprehensive USB solution.
For professional recording
Features zero-latency monitoring.
Professional recording demands proper monitoring functionality. Blend between zero-latency direct and playback monitoring. This is essential to avoid latency problems using your mobile device.
Low-cut and attenuation
Adapt to every situation.
Low-cut: linear, 80 Hz
Attenuation: 0 dB, -10 dB
Vocal recording
Unmatched quality – anyplace, anytime.
Pure condenser sound captures your voice in studio quality. Perfect for traditional vocal recording, voice over, podcast and streaming, you name it.
Powerful headphone amp
Never run out of headroom.
With our powerful headphone amp you can easily drive any set of studio headphones so that you will hear every signal loud and clear during production.
Control Center software
The Control Center – available for PC and Mac – allows remote control of all parameters from your host device
Supreme technology
Everything that you need, and more.
- 24 bit / 96 kHz high-end AD/DA converter
- 93 dB dynamic range
- 118 dB SPL max
- Powerful built-in powerful headphone amp
- 2 low-cut settings
- 2 pre-attenuation settings
- Asynchronous USB transfer
- Micro-USB-powered
Reviews
Courtney Taylor
"The sound that the DGT 450 captures is amazing: what you hear is what you get on the recording."
Courtney Taylor is an extraordinary producer, recording engineer and FOH, who has worked with Pharrell Williams, Robin Thicke, A$AP Rocky,...
Josh Lovelace
"The DGT 450, with its clear, crisp, and great sound quality, is the best product we can possibly have!"
Josh Lovelace is the keyboardist of the American rock band NEEDTOBREATHE.
Specifications
Microphone
- Type
Condenser, permanently polarized
- Acoustical operating principle
Pressure gradient transducer
- Transducer Ø
17 mm, 0.67 in
- Polar pattern
Cardioid
- Frequency range
50 ... 20,000 Hz
- Dynamic range
93 dB (A)
- Pre-attenuation pad
0 dB
-10 dB
- Low-cut filter
linear
80 Hz (12 dB/oct)
- Front to back ratio at 1kHz
≥ 15 dB (A)
- Sensitivity at 1 kHz
- 24 dBFS
- Analog gain range
0 ... 44 dB
- Equivalent noise level
25 dB (A)
- Max. SPL for 0.5 % THD
118 dBSPL, 0 dB pre-attenuation
General
- Resolution
24 Bit
- Sample rate
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Recording modes
Cardioid, Cardioid + Line-in
- Supply voltage (DGT)
on iOS additional 5V/500mA, micro-USB power supply required
- Connector
USB to 18-pin lockable hi-speed connector
Line-in
- Input impedance
> 1 Meg Ω
- Full scale input voltage (0 dB gain)
0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
- Input dynamic range
≥ 96 dB (A)
- Frequency response
20 ... 20,000 Hz
- Operating principle
Mono line input
- Analog gain range
0 ... 12 dB
Headphones
- Headphone output power
20 mW at 16 Ω, THD+N < 0,5%
16 mW at 32 Ω, THD+N < 0,5%
- Frequency response
20 ... 20,000 Hz
- Headphone volume control
- 60 dB ... 0 dB
Microphones measured according to: IEC 60268-4 | Phantom power according to: IEC 61938 | Noise measurement according to: IEC 60268-1
