Capture every detail.LCT 540 S
- 1" true condenser studio microphone
- Self-noise below the threshold of human hearing
- Ideal for extreme processing
- Low-cut filters and attenuation
- Cardioid polar pattern
Included: Shock mount, Magnetic pop filter, Foam windscreen, Transport bag , Transport case
On stock. Free shipping to until . Prices include VAT.
Experience a whole new level of musical detail.
Our unique approach towards electronics and capsule design makes the microphone better than human hearing. With the LCT 540 S, we set a new benchmark in terms of capturing fine-grained details of your recording source. Record details of your voice and instruments that usually wouldn’t even be audible. Make every detail count.
Self-noise values below the threshold of human hearing.
Our hearing threshold is very frequency-dependent. It is less sensitive towards low and very high frequencies and most sensitive around 2 – 5 kHz. With our specific and unique approach towards circuit and capsule design, we were able to realize self-noise that'll stay below the threshold of hearing across the entire frequency spectrum.
Fit for extreme processing.
With its cutting-edge circuit and capsule design, the LCT 540 S features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal. Material recorded with the LCT 540 S is fit for extreme processing.
Sound samples
Reviews
Perfect match technology.
Every single LCT 540 S undergoes a series of measurements followed by adjustment of the polarization voltage to achieve the same sensitivity in every LCT 540 S we will ever produce. This way, you can form a pair when you buy another one later on.
Need help finding the right microphone for you?
Specifications
- Type
Condenser, externally polarized
- Acoustical operating principle
Pressure gradient transducer, externally polarized
- Transducer Ø
25.4 mm, 1 in
- Diaphragm
3 micron gold sputtered Mylar
- Polar pattern
Cardioid
- Frequency range
20 ... 20,000 Hz
- Sensitivity
41 mV/Pa, -28 dBV/Pa
- Self-noise
4 dB (A)
- Max. SPL for 0.5 % THD
136 dBSPL, 0 dB attenuation
- Signal / noise ratio
90 dB (A)
- Dynamic range
132 dB (A)
- Attenuation
0 dB
-6 dB
-12 dB
- Low-cut filter
linear
80 Hz (6 dB/oct)
160 Hz (6 dB/oct)
- Internal impedance
68 Ω
- Supply voltage
48 V ± 4 V
- Current consumption
3.6 mA
- Microphone enclosure
Zinc die cast
- Connector
Gold-plated 3-pin XLR
- Microphone dimensions
158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
- Microphone net weight
371 g, 13.1 oz
Microphones measured according to: IEC 60268-4 | Phantom power according to: IEC 61938 | Noise measurement according to: IEC 60268-1